DUROVIT
TECHNICAL SPECIFICATIONS
- Surface drying time 60 min
- Water dilution percentage 100%
- Spreading rate 14-16 m2/lt
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
APPLICATION
Stir well before use. Apply one coat by roller, brush or airless spray gun. For walls diluted up to 100% with Brush Solvent T 300 and for roofs up to 30%. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%.
It is touch dry after 1 hour and can be recoated after 4-6 hours for coated with Vitex’s emulsion or acrylic paints. Drying time depends on weather conditions (humidity and temperature).
Clean rollers, brushes, floor stains, etc. with Brush Solvent T 300 and then with soapy water or detergent.
TECHNICAL SPECIFICATIONS
- Surface drying time 60 min
- Water dilution percentage 100%
- Spreading rate 14-16 m2/lt
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
APPLICATION
Stir well before use. Apply one coat by roller, brush or airless spray gun. For walls diluted up to 100% with Brush Solvent T 300 and for roofs up to 30%. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%.
It is touch dry after 1 hour and can be recoated after 4-6 hours for coated with Vitex’s emulsion or acrylic paints. Drying time depends on weather conditions (humidity and temperature).
Clean rollers, brushes, floor stains, etc. with Brush Solvent T 300 and then with soapy water or detergent.