DIAXYL DECOR WATER BASED
TECHNICAL SPECIFICATIONS
- Surface drying time 1-2h
- Spreading rate 12-16m2/lt
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean, dry, free from grease, rosins or
old varnishes. On new wooden surfaces apply preservative
Diaxyl Waterbased colourless or Diaxyl Extra for protection against
mould and insects.
APPLICATION
Stir well before use and repeat occasionally during application.Apply
one or more coats by brush, roller or spray gun without dilution. Do
not apply at temperature below 5οC, above 35οC and/or relative humidity
above 80% or when the wood moisture should exceed 18%.
It is touch dry after 1-2 hours and can be recoated after 10-12 hours.
After it completely dries, we may apply as final varnish Lussolac
Waterbased or Marelac Waterbased. Drying time depends on weather
conditions (humidity and temperature). The final colour of the wooden
surface depends largely on its physical colour and absorption, as well
as the number of Diaxyl Decor Waterbased coats applied.
Tools must be cleaned immediately after use with water and if needed with soapy water or detergent.
TECHNICAL SPECIFICATIONS
- Surface drying time 1-2h
- Spreading rate 12-16m2/lt
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean, dry, free from grease, rosins or
old varnishes. On new wooden surfaces apply preservative
Diaxyl Waterbased colourless or Diaxyl Extra for protection against
mould and insects.
APPLICATION
Stir well before use and repeat occasionally during application.Apply
one or more coats by brush, roller or spray gun without dilution. Do
not apply at temperature below 5οC, above 35οC and/or relative humidity
above 80% or when the wood moisture should exceed 18%.
It is touch dry after 1-2 hours and can be recoated after 10-12 hours.
After it completely dries, we may apply as final varnish Lussolac
Waterbased or Marelac Waterbased. Drying time depends on weather
conditions (humidity and temperature). The final colour of the wooden
surface depends largely on its physical colour and absorption, as well
as the number of Diaxyl Decor Waterbased coats applied.
Tools must be cleaned immediately after use with water and if needed with soapy water or detergent.