DIAXYL WATERBASED WOOD PRESERVATIVE
Colorless
water-based wood preservative for exterior surfaces such as windows,
exterior doors, fences, panelling etc. It has excellent penetration
properties and protects wood effectively against wood rotting fungi,
blue stain and mould according to European standards EN 113, EN 73, EN
84 and EN 152.
• Protects from fungi
• According to European standards EN 113, EN 73, ΕΝ 84 and EN 152
COLOURS
Available in colourless.
TECHNICAL SPECIFICATIONS
- Surface drying time 1-2h
- Spreading rate 4-6m2/L
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean, dry, free from grease, rosins or old varnishes.
APPLICATION
Stir well before use. Apply one or more coats by brush or roller
without dilution. Not for use on wood in direct contact with soil or
water. Do not apply at temperature below 5οC, above 35οC and/or relative
humidity above 80% or when the wood moisture should exceed 18%.
It is touch dry after 1-2 hours and can be recoated after 24 hours.
After it completely dries, apply penetration varnish Diaxyl
Plus Waterbased or final varnish Lussolac Waterbased or Marelac
Waterbased. Drying time depends on weather conditions (humidity and
temperature).
Tools must be cleaned immediately after use with water and if needed with soapy water or detergent.
Colorless
water-based wood preservative for exterior surfaces such as windows,
exterior doors, fences, panelling etc. It has excellent penetration
properties and protects wood effectively against wood rotting fungi,
blue stain and mould according to European standards EN 113, EN 73, EN
84 and EN 152.
• Protects from fungi
• According to European standards EN 113, EN 73, ΕΝ 84 and EN 152
COLOURS
Available in colourless.
TECHNICAL SPECIFICATIONS
- Surface drying time 1-2h
- Spreading rate 4-6m2/L
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean, dry, free from grease, rosins or old varnishes.
APPLICATION
Stir well before use. Apply one or more coats by brush or roller
without dilution. Not for use on wood in direct contact with soil or
water. Do not apply at temperature below 5οC, above 35οC and/or relative
humidity above 80% or when the wood moisture should exceed 18%.
It is touch dry after 1-2 hours and can be recoated after 24 hours.
After it completely dries, apply penetration varnish Diaxyl
Plus Waterbased or final varnish Lussolac Waterbased or Marelac
Waterbased. Drying time depends on weather conditions (humidity and
temperature).
Tools must be cleaned immediately after use with water and if needed with soapy water or detergent.