VITO ECO
Certified ecological emulsion paint with great hiding power and high spreading rate. Easy to apply with very good leveling properties producing a smooth, flat surface.
Ecological emulsion paint for general interior use. It exhibits great hiding power and high spreading rate. It has very good leveling properties and produces a smooth flat finish. It is virtually odourless because it does not contain dangerous substances, such as aromatic hydrocarbons, ammonia, free formaldehyde, heavy metals or alkylphenolethoxylates. It is certified according to the criteria of the European Union Eco labelling Board (EUEB).
- Ecological
- Great hiding power and high spreading rate
COLOURS
Available in white and unlimited number of shades through Vitex’s Colorfull Tinting System.
TECHNICAL SPECIFICATIONS
- Surface drying time 15-30 min
- Water dilution percentage 5-10%
- Spreading rate 11 – 13 m2/Lt
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
To fill any cracks or holes use Acrylic Putty or Visto.
Surfaces previously covered with water paints or distempers (lime wash or ceiling white) should be primed with Acrylan Unco Eco or Durovit.
New surfaces made of plaster, concrete, cement, plasterboard, etc. should be first primed with 100% Acrylic Primer or Acrylan Unco Eco or Blanco Eco.
Surfaces stained from smoke, graffity, coffee or any other kind of stain should first be primed with Blanco Eco or Vitosin.
APPLICATION
Stir well before use. Apply two coats by roller, brush or airless spray gun diluted up to 10% with water. Do not apply at temperature below 5°C, above 35°C and/ or relative humidity above 80%.
It is touch-dry after 30-60 minutes and can be recoated after 3-4 hours. Drying time depends on weather conditions (humidity and temperature).
Allow at least 2 weeks before cleaning and washing newly painted surfaces with Vitex with Teflon™. Wash gently with water using a soft sponge. In case of bad stains, use a mild colourless detergent or soapy water.
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergen
Certified ecological emulsion paint with great hiding power and high spreading rate. Easy to apply with very good leveling properties producing a smooth, flat surface.
Ecological emulsion paint for general interior use. It exhibits great hiding power and high spreading rate. It has very good leveling properties and produces a smooth flat finish. It is virtually odourless because it does not contain dangerous substances, such as aromatic hydrocarbons, ammonia, free formaldehyde, heavy metals or alkylphenolethoxylates. It is certified according to the criteria of the European Union Eco labelling Board (EUEB).
- Ecological
- Great hiding power and high spreading rate
COLOURS
Available in white and unlimited number of shades through Vitex’s Colorfull Tinting System.
TECHNICAL SPECIFICATIONS
- Surface drying time 15-30 min
- Water dilution percentage 5-10%
- Spreading rate 11 – 13 m2/Lt
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
To fill any cracks or holes use Acrylic Putty or Visto.
Surfaces previously covered with water paints or distempers (lime wash or ceiling white) should be primed with Acrylan Unco Eco or Durovit.
New surfaces made of plaster, concrete, cement, plasterboard, etc. should be first primed with 100% Acrylic Primer or Acrylan Unco Eco or Blanco Eco.
Surfaces stained from smoke, graffity, coffee or any other kind of stain should first be primed with Blanco Eco or Vitosin.
APPLICATION
Stir well before use. Apply two coats by roller, brush or airless spray gun diluted up to 10% with water. Do not apply at temperature below 5°C, above 35°C and/ or relative humidity above 80%.
It is touch-dry after 30-60 minutes and can be recoated after 3-4 hours. Drying time depends on weather conditions (humidity and temperature).
Allow at least 2 weeks before cleaning and washing newly painted surfaces with Vitex with Teflon™. Wash gently with water using a soft sponge. In case of bad stains, use a mild colourless detergent or soapy water.
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergen