VITO FOR CONCRETE SURFACES ACRYLIC WATER-BASED PAINT
for Concrete Surfaces Acrylic water-based concrete paint water for outdoor use. Due to its excellent resistance to alkali it is recommended for painting and protection of all concrete surfaces. Available in grey shade 985.
Acrylic water based paint for exterior concrete surfaces. It is recommended particularly for the protection of any cement surface, due to the excellent resistance to alkali. It exhibits great hiding power and high spreading rate. It is easily applied with very good leveling, producing a smooth flat surface.
• For the protection of any cement surface
• Great hiding power - spreading rate
COLOURS
Available in grey 985.
TECHNICAL SPECIFICATIONS
- Surface drying time 30-60 min
- Water dilution percentage 0-10%
- Spreading rate 10-12 m2/lL
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
To fill any cracks or holes use Acrylic Putty.
Surfaces previously covered with water paints or distempers (lime wash or ceiling white) should be primed with Acrylan Unco Eco, Durovit or Vitosin.
New surfaces made of plaster, concrete, cement, plasterboard, etc. should be first primed with Acrylan Unco Eco or Durovit.
APPLICATION
Stir well before use. Apply two coats by roller, brush or airless spray gun diluted up to 10% with water. Do not apply at temperature below 5°C, above 35°C and / or relative humidity above 70%. Avoid application when rain or frost is expected in the next 48 hours.
It is touch-dry after 30-60 minutes and can be recoated after 3-4 hours. Drying time depends on weather conditions (humidity and temperature).
Allow at least 3 weeks before cleaning and washing newly painted surfaces with Vito Concrete Paint.
Wash gently with water using a soft sponge. In case of bad stains, use a mild colourless detergent or soapy water.
Tools must be cleaned immediately after use with water and if neededwith soapy water or a detergent.
for Concrete Surfaces Acrylic water-based concrete paint water for outdoor use. Due to its excellent resistance to alkali it is recommended for painting and protection of all concrete surfaces. Available in grey shade 985.
Acrylic water based paint for exterior concrete surfaces. It is recommended particularly for the protection of any cement surface, due to the excellent resistance to alkali. It exhibits great hiding power and high spreading rate. It is easily applied with very good leveling, producing a smooth flat surface.
• For the protection of any cement surface
• Great hiding power - spreading rate
COLOURS
Available in grey 985.
TECHNICAL SPECIFICATIONS
- Surface drying time 30-60 min
- Water dilution percentage 0-10%
- Spreading rate 10-12 m2/lL
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
To fill any cracks or holes use Acrylic Putty.
Surfaces previously covered with water paints or distempers (lime wash or ceiling white) should be primed with Acrylan Unco Eco, Durovit or Vitosin.
New surfaces made of plaster, concrete, cement, plasterboard, etc. should be first primed with Acrylan Unco Eco or Durovit.
APPLICATION
Stir well before use. Apply two coats by roller, brush or airless spray gun diluted up to 10% with water. Do not apply at temperature below 5°C, above 35°C and / or relative humidity above 70%. Avoid application when rain or frost is expected in the next 48 hours.
It is touch-dry after 30-60 minutes and can be recoated after 3-4 hours. Drying time depends on weather conditions (humidity and temperature).
Allow at least 3 weeks before cleaning and washing newly painted surfaces with Vito Concrete Paint.
Wash gently with water using a soft sponge. In case of bad stains, use a mild colourless detergent or soapy water.
Tools must be cleaned immediately after use with water and if neededwith soapy water or a detergent.