LUSSOLAC WATER BASED
TECHNICAL SPECIFICATIONS
- Surface drying time 2-3h
- Spreading rate 12-14m2/lt
- Water dilution percentage 10%
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean, dry, free from grease or rosins and abrased.
On new wooden surfaces apply preservative Diaxyl Decor water-based.
APPLICATION
Stir well before use. Apply one or two coats by roller, brush or spray
gun diluted up to 10% with water. Do not apply at temperatures below
5oC, above 35oC and/or relative humidity above 80%.
It is touch-dry after 1-2 hours and can be recoated after 6-8 hours.
Drying time depends on weather conditions (humidity and temperature).
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.
TECHNICAL SPECIFICATIONS
- Surface drying time 2-3h
- Spreading rate 12-14m2/lt
- Water dilution percentage 10%
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean, dry, free from grease or rosins and abrased.
On new wooden surfaces apply preservative Diaxyl Decor water-based.
APPLICATION
Stir well before use. Apply one or two coats by roller, brush or spray
gun diluted up to 10% with water. Do not apply at temperatures below
5oC, above 35oC and/or relative humidity above 80%.
It is touch-dry after 1-2 hours and can be recoated after 6-8 hours.
Drying time depends on weather conditions (humidity and temperature).
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.