PLASTER-BOARD PRIMER
White filling primer for plasterboard. It compensates the absorbency difference between the plaster-board, jointing material and all the surrounding surfaces to be painted.
Water based acrylic primer for interior use withexcellent filling properties on plaster-board surfaces and every other interior surface such as plaster, concrete etc. due to its exceptional filling properties, the absorbency difference between the plaster-board and all the surrounding surfaces to be painted is compensated. Moreover, it covers completely any unevenness of the plaster-boards' paper. Surfaces primed with Plaster-board Primer can be painted with any water-based decorative paint resulting in an excellent and even finishing, even when only a single layer of primer is applied. Virtually odourless during its application.
• Exceptional filling properties
• Covers completely any unevenness of the plaster-board
COLOURS
Available in white.
TECHNICAL SPECIFICATIONS
- Surface drying time 30-60 min
- Water dilution percentage 10-15%
- Spreading rate 12-14 m2/lL
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
To fill any cracks or holes use Acrylic Putty.
APPLICATION
Stir well before use. Apply one or two coats by roller or brush diluted up to 5-10% with water or by airless spray gun diluted up to 10-15% with water. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%.
It is touch-dry after 30-60 minutes and can be recoated after 6-8 hours with Vitex’s emulsion or acrylic paints. Drying time depends on weather conditions (humidity and temperature).
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.
White filling primer for plasterboard. It compensates the absorbency difference between the plaster-board, jointing material and all the surrounding surfaces to be painted.
Water based acrylic primer for interior use withexcellent filling properties on plaster-board surfaces and every other interior surface such as plaster, concrete etc. due to its exceptional filling properties, the absorbency difference between the plaster-board and all the surrounding surfaces to be painted is compensated. Moreover, it covers completely any unevenness of the plaster-boards' paper. Surfaces primed with Plaster-board Primer can be painted with any water-based decorative paint resulting in an excellent and even finishing, even when only a single layer of primer is applied. Virtually odourless during its application.
• Exceptional filling properties
• Covers completely any unevenness of the plaster-board
COLOURS
Available in white.
TECHNICAL SPECIFICATIONS
- Surface drying time 30-60 min
- Water dilution percentage 10-15%
- Spreading rate 12-14 m2/lL
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
To fill any cracks or holes use Acrylic Putty.
APPLICATION
Stir well before use. Apply one or two coats by roller or brush diluted up to 5-10% with water or by airless spray gun diluted up to 10-15% with water. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%.
It is touch-dry after 30-60 minutes and can be recoated after 6-8 hours with Vitex’s emulsion or acrylic paints. Drying time depends on weather conditions (humidity and temperature).
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.