MARELAC

Click Image for Gallery

Description

Highly durable polyurethane based varnish with UV filters and HALS light stabilizers. For wooden surfaces exposed to adverse weatherconditions. The ultimate wood protection. Ideal for boats, yachts, doors, windows, wooden exterior furniture, etc.

Solvent-based, clear, polyurethane varnish, one component, suitable for wooden surfaces exposed to adverse weather conditions. It is ideal for boats, yachts, ships, as well as doors, window frames, wooden furniture etc. It has excellent application properties, high gloss as well as very good elasticity and hardness. It contains UV filters with light stabilisers HALS to protect wood from the damaging effects of sunrays and from extreme weather conditions.

• Extremely durable polyurethane wood varnish
• With UV filters and light stabilisers HALS
• Ideal for wooden surfaces exposed to adverse weather conditions
• The ultimate protection for wood

COLOURS
Available colourless in gloss finish.

TECHNICAL SPECIFICATIONS

Surface drying time 2-3h
Spreading rate 14-16m2/lt
Solvent dilution percentage 5%
Application by brass
Application by roller
Application by Spray gun

INSTRUCTIONS

SURFACE PREPARATION

Surfaces should be smooth, clean and dry, free from grease or resins and abrased.

On new wooden surfaces apply preservative Diaxyl Décor.

APPLICATION

Stir well before use. Apply one or two coats by roller or brush diluted up to 5% with Brush Solvent T 300 or airless spray gun diluted up to 5% with Spray Gun Solvent T 350. Do not apply at temperatures below 5°C, above 35°C and/or relative humidity above 80%.

It is touch-dry after 3-4 hours and can be recoated after 20-24 hours. Drying time depends on weather conditions (humidity and temperature).

Clean rollers, brushes, floor stains, etc. with Brush Solvent T 300 and then with soapy water or detergent. Use Spray Gun Solvent T 350 to clean spray guns.

Description