TEAK OIL

Click Image for Gallery

Description

Penetrating oil, mixture of modified and natural oils enriched with wax. Penetrates deeply into the pores of the wood preventing the penetration of water and enhances its natural beauty. Refreshes, preserves and protects the wood from the strong sunlight and humidity.

Mixture of modified natural oils combined with wax. It can be used to refresh and preserve wooden surfaces like teak, oregon, rosewood, mahogany etc. as well as for all bare woods. It is suitable for interior and exterior use. It penetrates deeply through the wood pores preventing the penetration of water and enhances its natural beauty.

Refresh, preserve and protect the wood from the strong sunlight and humidity.

Penetration oil from mixture of modified natural oils enriched with wax
Refresh, preserves and protect the wood from the strong sunlight and humidity

COLOURS

Available colourless.

TECHNICAL SPECIFICATIONS

Surface drying time 2-3h
Spreading rate 14-16m2/lt
Application by brass
Application by roller
Application by Spray gun

INSTRUCTIONS

SURFACE PREPARATION

Surfaces should be smooth, clean, dry, free from grease, rosins or old varnishes.

APPLICATION
Stir well before use. Apply one coat by brush or piece of cloth without dilution. Wipe excess material after 5 minutes with a dry cloth. Apply a second coat for tough wood or when wood is exposed to adverse weather conditions. Do not apply at temperatures below 5°C, above 35°C and/or relative humidity above 80%.
It is touch dry after 2-3 hours and can be recoated after 2 days. Drying time depends on weather conditions (humidity and temperature).
Clean rollers, brushes, floor stains, etc. with Brush Solvent T 300 and then with soapy water or detergent.

Description