PreColor Primer
New technology white waterborne primer, based on acrylic resins, for exterior and interior use, that can be colored through Vitex Coloring System and increases coverage by reducing the numbers of layers required of topcoat.
Characteristics
New technology white waterborne primer, based on acrylic resins, for exterior and interior use, that can be colored through Vitex Coloring System and increases coverage by reducing the numbers of layers required of topcoat.
By working inside the color space of the topcoat color, the right shade of primer allows the topcoat to more fully and more quickly develop its true color.
It is colored in 3 shades, Yellow, Red and Gray, depending on the final shade and based on the color space of the topcoat color, to reduce the number of layers in final shades made from a transparent base. It can also be colored for shades made from medium and white base for extra coverage.
It has very good hiding power, is applied easily, dries fast, has high spreading rate and is used as an undercoat for all waterbased paints of Vitex. It improves appearance, adhesion and weather resistance of topcoat.
- Increases coverage
- Can be colored for all final shades
- For exterior and interior use
COLOURS
Available in white. It can be colored through Vitex Coloring System in 3 shades, Yellow, Red and Gray, for shades made from a transparent base. It can also be colored for shades made from medium and white base.
TECHNICAL SPECIFICATIONS
- Surface drying time 30-60 min
- Water dilution percentage 0%
- Spreading rate 10-12 m2/L
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
Use Acrylic Putty of Vitex to fill any cracks or holes.
New surfaces made of plaster, concrete, rendering, plaster-board etc., are sanded with a suitable abrasive paper and then painted with PreColor Primer of Vitex.
APPLICATION
Stir well before use. Apply one coat by roller or brush undiluted or by airless spray gun diluted up to 5-10% with water. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%.
It is touch-dry after 30-60 minutes and can be recoated after 3-4 hours with Vitex’s emulsion or acrylic paints. Drying time depends on weather conditions (humidity and temperature).
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.
TECHNICAL CHARACTERISTICS
Viscosity: 95 ± 5 KU (ASTM D 562, 25o C)
Density: 1,21 ± 0,02 Kg / L -White (ISO 2811)
STORAGE
Containers must be kept closed in a cool, dry, well ventilated area protected from direct sunlight at temperatures between 5°C - 38°C.
SAFETY ADVICE
Read label before use. For further instructions - precautions see Material Safety Data Sheet.
New technology white waterborne primer, based on acrylic resins, for exterior and interior use, that can be colored through Vitex Coloring System and increases coverage by reducing the numbers of layers required of topcoat.
Characteristics
New technology white waterborne primer, based on acrylic resins, for exterior and interior use, that can be colored through Vitex Coloring System and increases coverage by reducing the numbers of layers required of topcoat.
By working inside the color space of the topcoat color, the right shade of primer allows the topcoat to more fully and more quickly develop its true color.
It is colored in 3 shades, Yellow, Red and Gray, depending on the final shade and based on the color space of the topcoat color, to reduce the number of layers in final shades made from a transparent base. It can also be colored for shades made from medium and white base for extra coverage.
It has very good hiding power, is applied easily, dries fast, has high spreading rate and is used as an undercoat for all waterbased paints of Vitex. It improves appearance, adhesion and weather resistance of topcoat.
- Increases coverage
- Can be colored for all final shades
- For exterior and interior use
COLOURS
Available in white. It can be colored through Vitex Coloring System in 3 shades, Yellow, Red and Gray, for shades made from a transparent base. It can also be colored for shades made from medium and white base.
TECHNICAL SPECIFICATIONS
- Surface drying time 30-60 min
- Water dilution percentage 0%
- Spreading rate 10-12 m2/L
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
Use Acrylic Putty of Vitex to fill any cracks or holes.
New surfaces made of plaster, concrete, rendering, plaster-board etc., are sanded with a suitable abrasive paper and then painted with PreColor Primer of Vitex.
APPLICATION
Stir well before use. Apply one coat by roller or brush undiluted or by airless spray gun diluted up to 5-10% with water. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%.
It is touch-dry after 30-60 minutes and can be recoated after 3-4 hours with Vitex’s emulsion or acrylic paints. Drying time depends on weather conditions (humidity and temperature).
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.
TECHNICAL CHARACTERISTICS
Viscosity: 95 ± 5 KU (ASTM D 562, 25o C)
Density: 1,21 ± 0,02 Kg / L -White (ISO 2811)
STORAGE
Containers must be kept closed in a cool, dry, well ventilated area protected from direct sunlight at temperatures between 5°C - 38°C.
SAFETY ADVICE
Read label before use. For further instructions - precautions see Material Safety Data Sheet.