PRIMER WATER-BASED 100% ACRYLIC
Water-based, virtually odorless undercoat, 100% acrylic, with excellent adhesion to masonry, providing surfaces with less absorbency. Easy to apply with high spreading rate. Improves appearance, adhesion, hiding power and durability of the final coating.
Semi-transparent water-based primer of 100% acrylic resins. It is
used as an undercoat for Vitex's water-based paints (emulsion, acrylic, cement paints, relief, etc.). It is very easy to apply and has high spreading rate. It improves the appearance, hiding power and weather resistance of the final coat. It is a suitable primer for alkaline surfaces as well because it impregnates and stabilizes them. Virtually odourless during its application because it does not contain ammonia.
• 100% acrylic
• Excellent adhesion
• Improves the final coat
COLOURS
Available in semi-transparent.
TECHNICAL SPECIFICATIONS
- Surface drying time 15-30 min
- Spreading rate 18-20 m2/Lt
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
APPLICATION
Stir well before use. Apply one coat by roller, brush or airless spray gun diluted up to 300-400% with water. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%.
It is touch-dry after 15-30 minutes and can be recoated after 4-6 hours with Vitex’s emulsion or acrylic paints. Drying time depends on weather conditions (humidity and temperature).
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.
Water-based, virtually odorless undercoat, 100% acrylic, with excellent adhesion to masonry, providing surfaces with less absorbency. Easy to apply with high spreading rate. Improves appearance, adhesion, hiding power and durability of the final coating.
Semi-transparent water-based primer of 100% acrylic resins. It is
used as an undercoat for Vitex's water-based paints (emulsion, acrylic, cement paints, relief, etc.). It is very easy to apply and has high spreading rate. It improves the appearance, hiding power and weather resistance of the final coat. It is a suitable primer for alkaline surfaces as well because it impregnates and stabilizes them. Virtually odourless during its application because it does not contain ammonia.
• 100% acrylic
• Excellent adhesion
• Improves the final coat
COLOURS
Available in semi-transparent.
TECHNICAL SPECIFICATIONS
- Surface drying time 15-30 min
- Spreading rate 18-20 m2/Lt
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
APPLICATION
Stir well before use. Apply one coat by roller, brush or airless spray gun diluted up to 300-400% with water. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%.
It is touch-dry after 15-30 minutes and can be recoated after 4-6 hours with Vitex’s emulsion or acrylic paints. Drying time depends on weather conditions (humidity and temperature).
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.