PLATINUM

TECHNICAL SPECIFICATIONS

• Surface drying time 3-4 h
  
• Water dilution percentage 2%
  
• Spreading rate 14-16 m2/lt
  
• Application by brass
• Application by roller
• Application by Spray gun
  

INSTRUCTIONS

SURFACE PREPARATION

Surfaces should be smooth, clean and dry, free from grease or dust and sanded. Properly prepared wooden surfaces (treated with wood preservative Diaxyl colourless or Diaxyl Extra for protection against mould and insects, stoppered, filled with Acrylic Putty and sanded down to a clean, smooth surface) should be coated with Velatura. Then use an appropriate abrasive paper to produce a smooth surface and remove the dust. Metallic surfaces should be coated with an anticorrosive primer (Anti-Rust Primer, Minio New Type or Metal Primer). Glossy metallic surfaces (aluminum, galvanized steel etc) should be first coated with Primer for Glossy Surfaces or surfaces Wash Primer.

APPLICATION

Stir well before use. Apply two coats by roller or brush diluted up to 2% with Brush Solvent T 300 or airless spray gun diluted up to 2% with Spray Gun Solvent
T 350. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%. It is touch dry after 3-4 hours and can be recoated after 20-24 hours. Drying time depends on weather conditions (humidity and temperature). Allow at least 30 days before cleaning and washing newly painted
surfaces with Platinum. Clean rollers, brushes, floor stains, etc. with Brush
Solvent T 300 and then with soapy water or detergent. Use Spray Gun Solvent T 350 to clean spray guns.