CIMENTOL
Solvent-based concrete paint Acrylic solvent-based concrete paint for outdoor, suitable for walls, concrete floors, tiles, garage, tennis courts etc. It offers great durability against adverse weather conditions and atmospheric pollution. Available in 8 shades.
Excellent solvent-based acrylic masonry paint, suitable for application on concrete floor surfaces, garage, walls, tiles and sport courts, ideal for interior and exterior use. It offers great durability against adverse weather conditions and atmospheric pollution. It provides strong adhesion, great hiding power and hardness.
• For walls, concrete floors, tiles etc
• Strong adhesion and hardness
COLOURS
Available in white and 8 more shades.
TECHNICAL SPECIFICATIONS
- Surface drying time 20-40 min
- Water dilution percentage 5%
- Spreading rate 10-12 m2/lL
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
Cimentol is applied directly to concrete without any primer. High absorbing or loose surfaces should be primed with Durovit.
APPLICATION
Stir well before use. Apply two coats by roller or brush diluted up to 5% with Brush Solvent T 300 or airless spray gun diluted up to 5% with Spray Gun Solvent T 350. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%.
It is touch dry after 20-40 minutes and can be recoated after 4-6 hours for coated. Drying time depends on weather conditions (humidity and temperature).
Clean rollers, brushes, floor stains, etc. with Brush Solvent T 300 and then with soapy water or detergent. Use Spray Gun Solvent T 350 to clean spray guns.
Solvent-based concrete paint Acrylic solvent-based concrete paint for outdoor, suitable for walls, concrete floors, tiles, garage, tennis courts etc. It offers great durability against adverse weather conditions and atmospheric pollution. Available in 8 shades.
Excellent solvent-based acrylic masonry paint, suitable for application on concrete floor surfaces, garage, walls, tiles and sport courts, ideal for interior and exterior use. It offers great durability against adverse weather conditions and atmospheric pollution. It provides strong adhesion, great hiding power and hardness.
• For walls, concrete floors, tiles etc
• Strong adhesion and hardness
COLOURS
Available in white and 8 more shades.
TECHNICAL SPECIFICATIONS
- Surface drying time 20-40 min
- Water dilution percentage 5%
- Spreading rate 10-12 m2/lL
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
Cimentol is applied directly to concrete without any primer. High absorbing or loose surfaces should be primed with Durovit.
APPLICATION
Stir well before use. Apply two coats by roller or brush diluted up to 5% with Brush Solvent T 300 or airless spray gun diluted up to 5% with Spray Gun Solvent T 350. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%.
It is touch dry after 20-40 minutes and can be recoated after 4-6 hours for coated. Drying time depends on weather conditions (humidity and temperature).
Clean rollers, brushes, floor stains, etc. with Brush Solvent T 300 and then with soapy water or detergent. Use Spray Gun Solvent T 350 to clean spray guns.