DIAXYL DECOR
TECHNICAL SPECIFICATIONS
- Surface drying time 1-2h
- Spreading rate 12-16m2/lt
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean, dry, free from grease, rosins or old varnishes. On new wooden surfaces apply preservative Diaxyl colourless or Diaxyl Extra for protection against mould and insects.
APPLICATION
Stir well before use and repeat occasionally during application. Apply one or more coats by brush, roller or spray gun without dilution. Do not apply at temperature below 5°C, above 35°C and/or relative humidity above 80% or when the wood moisture should exceed 18%.
It is touch dry after 2-3 hours and can be recoated after 8 - 10 hours. After it completely dries, we may apply as final varnish Lussolac or Marelac. Drying time depends on weather conditions (humidity and temperature). The final colour of the wooden surface depends largely on its physical colour and absorption, as well as the number of Diaxyl Decor coats applied.
Clean rollers, brushes, floor stains, etc. with Brush Solvent T 300 and then with soapy water or detergent. Use Spray Gun Solvent T 350 to clean spray guns.
TECHNICAL SPECIFICATIONS
- Surface drying time 1-2h
- Spreading rate 12-16m2/lt
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean, dry, free from grease, rosins or old varnishes. On new wooden surfaces apply preservative Diaxyl colourless or Diaxyl Extra for protection against mould and insects.
APPLICATION
Stir well before use and repeat occasionally during application. Apply one or more coats by brush, roller or spray gun without dilution. Do not apply at temperature below 5°C, above 35°C and/or relative humidity above 80% or when the wood moisture should exceed 18%.
It is touch dry after 2-3 hours and can be recoated after 8 - 10 hours. After it completely dries, we may apply as final varnish Lussolac or Marelac. Drying time depends on weather conditions (humidity and temperature). The final colour of the wooden surface depends largely on its physical colour and absorption, as well as the number of Diaxyl Decor coats applied.
Clean rollers, brushes, floor stains, etc. with Brush Solvent T 300 and then with soapy water or detergent. Use Spray Gun Solvent T 350 to clean spray guns.