DIAXYL SOLVENT-BASED WOOD PRESERVATIVE

Colorless solvent-based wood preservative for exterior surfaces such as windows, exterior doors, fences, panelling etc. It has excellent penetration properties and protects wood effectively against wood rotting fungi, blue stain and mould according to European standards EN 113, EN 73, EN 84 and EN 152. 

• Protects from fungi
• According to European standards EN 113, EN 73, ΕΝ 84 and EN 152

TECHNICAL SPECIFICATIONS

• Surface drying time 1-2h
• Spreading rate 4-6m2/lt
• Application by brass
• Application by roller
• Application by Spray gun
  

INSTRUCTIONS

SURFACE PREPARATION

Surfaces should be smooth, clean, dry, free from grease, rosins or old varnishes.

APPLICATION

Stir well before use. Apply one or more coats by brush or roller without dilution. Not for use on wood in direct contact with soil or water. Do not apply at temperature below 5°C, above 35°C and/or relative humidity above 80% or when the wood moisture should exceed 18%. 
It is touch dry after 1-2 hours and can be recoated after 24 hours. After it completely dries, apply penetration varnish Diaxyl Plus or final varnish Lussolac or Marelac. Drying time depends on weather conditions (humidity and temperature).
Clean rollers, brushes, floor stains, etc. with Brush Solvent T 300 and then with soapy water or detergent. Use Spray Gun Solvent T 350 to clean spray guns.