ELASTOMERIC PUTTY
Elastomeric water-based acrylic putty that can be used for repair and waterproofing of interior and exterior surfaces. It contains microspheres attributing characteristics that make it ideal for repairing cracks and joints, since it hardly shrinks and does not crack. It has a high resistance to humidity, changes in temperature, alkalinity, external weather resistance and is used on surfaces such as concrete, brick, plaster, cement, wood, plasterboard. It has strong adhesion, it is simple to use and apply and easy to sand.
- For interior and exterior surfaces
- Hardly shrinks and does not crack
COLOURS
Available in grey.
TECHNICAL SPECIFICATIONS
- Surface drying time 3-6h
- Water dilution percentage Χωρίς αραίωση
- Spreading rate 1,5-2,5m2/kg
- Appication by spatula
INSTRUCTIONS
SURFACE PREPARATION
Surfaces must be clean, dry and smooth, free from dust, grease, loose material.
APPLICATION
Apply the product using a spatula without dilution in cracks up to 1 cm, as well as in larger with the prior use of sealant cord. It can be recoated with emulsion or solvent-based paints, with the prior use of a suitable primer of Vitex. Do not apply at temperature below 5°C, above 35°C and / or relative humidity above 80%.
It is touch dry after 3-6 hours depending on the dimensions of the crack-joint and can be recoated after 1-2 days, depending depending on the dimensions of the crack-joint. Drying time depends on weather conditions (humidity and temperature).
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.
Elastomeric water-based acrylic putty that can be used for repair and waterproofing of interior and exterior surfaces. It contains microspheres attributing characteristics that make it ideal for repairing cracks and joints, since it hardly shrinks and does not crack. It has a high resistance to humidity, changes in temperature, alkalinity, external weather resistance and is used on surfaces such as concrete, brick, plaster, cement, wood, plasterboard. It has strong adhesion, it is simple to use and apply and easy to sand.
- For interior and exterior surfaces
- Hardly shrinks and does not crack
COLOURS
Available in grey.
TECHNICAL SPECIFICATIONS
- Surface drying time 3-6h
- Water dilution percentage Χωρίς αραίωση
- Spreading rate 1,5-2,5m2/kg
- Appication by spatula
INSTRUCTIONS
SURFACE PREPARATION
Surfaces must be clean, dry and smooth, free from dust, grease, loose material.
APPLICATION
Apply the product using a spatula without dilution in cracks up to 1 cm, as well as in larger with the prior use of sealant cord. It can be recoated with emulsion or solvent-based paints, with the prior use of a suitable primer of Vitex. Do not apply at temperature below 5°C, above 35°C and / or relative humidity above 80%.
It is touch dry after 3-6 hours depending on the dimensions of the crack-joint and can be recoated after 1-2 days, depending depending on the dimensions of the crack-joint. Drying time depends on weather conditions (humidity and temperature).
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.