VITEX CLASSIC
The premium quality emulsion paint Vitex, unrivaled in spreading rate, durability and hiding power. It has excellent leveling properties producing a completely smooth, flat surface. Virtually odorless, a characteristic that makes it friendly to the end user and the environment.
Premium quality, vinyl emulsion paint, for interior use, based on PVA-VEOVA copolymers. It provides great hiding power, unmatched spreading rate and exceptional fastness to frequent washing. It has very good leveling properties and produces a smooth, flat surface. Vitex Classic emulsion paint, can be applied to properly prepared surfaces of any material. Virtually odourless during its application because it does not contain ammonia.
• Unmatched spreading rate
• Great hiding power
• Fastness to frequent washing
COLOURS
Available in white, 11 basic shades and 24 ready made shades and an unlimited number of shades through Vitex’s Colorfull Tinting System.
TECHNICAL SPECIFICATIONS
- Surface drying time 30-60 min
- Water dilution percentage 10%
- Spreading rate 15 – 18 m2/Lt
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
To fill any cracks or holes use Acrylic Putty or Visto.
Surfaces previously covered with water paints or distempers (lime wash or ceiling white) should be primed with Acrylan Unco Eco or Durovit.
New surfaces made of plaster, concrete, cement, plasterboard, etc. should be first primed with 100% Acrylic Primer or Acrylan Unco Eco or Blanco Eco.
Surfaces stained from smoke, graffity, coffee or any other kind of stain should first be primed with Blanco Eco or Vitosin.
APPLICATION
Stir well before use. Apply two coats by roller, brush or airless spray gun diluted up to 10% with water. Do not apply at temperature below 5°C
The premium quality emulsion paint Vitex, unrivaled in spreading rate, durability and hiding power. It has excellent leveling properties producing a completely smooth, flat surface. Virtually odorless, a characteristic that makes it friendly to the end user and the environment.
Premium quality, vinyl emulsion paint, for interior use, based on PVA-VEOVA copolymers. It provides great hiding power, unmatched spreading rate and exceptional fastness to frequent washing. It has very good leveling properties and produces a smooth, flat surface. Vitex Classic emulsion paint, can be applied to properly prepared surfaces of any material. Virtually odourless during its application because it does not contain ammonia.
• Unmatched spreading rate
• Great hiding power
• Fastness to frequent washing
COLOURS
Available in white, 11 basic shades and 24 ready made shades and an unlimited number of shades through Vitex’s Colorfull Tinting System.
TECHNICAL SPECIFICATIONS
- Surface drying time 30-60 min
- Water dilution percentage 10%
- Spreading rate 15 – 18 m2/Lt
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
To fill any cracks or holes use Acrylic Putty or Visto.
Surfaces previously covered with water paints or distempers (lime wash or ceiling white) should be primed with Acrylan Unco Eco or Durovit.
New surfaces made of plaster, concrete, cement, plasterboard, etc. should be first primed with 100% Acrylic Primer or Acrylan Unco Eco or Blanco Eco.
Surfaces stained from smoke, graffity, coffee or any other kind of stain should first be primed with Blanco Eco or Vitosin.
APPLICATION
Stir well before use. Apply two coats by roller, brush or airless spray gun diluted up to 10% with water. Do not apply at temperature below 5°C