VITOSIN
Insulating acrylic solvent primer, isolates and covers smoke, mold, fumes and other stains, preventing them to reappear. Ideal for insulating surfaces covered with distempers.
White mat, solvent-based, multi-purpose primer based on thermoplastic acrylic resins. Owing to its unique formula, it isolates and covers surfaces stained with smoke, smog, grease, moisture, mildew, etc., without allowing them to reappear. Due to its long-lasting whiteness, its exceptional resistance to water vapour and mildew is ideal for insulating surfaces covered with water paints or distempers (lime wash or ceiling white). It is also used as an undercoat for Vitex’s water-based paints and as a final paint for ceilings. It provides great hiding power, premium quality, superior durability, as well as excellent spreading rate and adhesion to masonry surfaces, plaster, wood, etc.
• Acrylic insulating primer
• For surfaces stained with smoke, smog, grease, moisture, mildew etc
• Ideal for insulating surfaces covered with water paints or distempers
COLOURS
Available in white.
TECHNICAL SPECIFICATIONS
- Surface drying time 1-2 h
- Water dilution percentage 5%
- Spreading rate 7-9 m2/lL
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
APPLICATION
Stir well before use. Apply one or two coats by roller or brush diluted up to 5% with Brush Solvent T 300 or airless spray gun diluted up to 5% with Spray Gun Solvent T 350. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%.
It is touch dry after 1-2 hours and can be recoated after 24 hours or after 4-6 hours for coated with Vitex’s emulsion or acrylic paints. Drying time depends on weather conditions (humidity and temperature).
Clean rollers, brushes, floor stains, etc. with Brush Solvent T 300 and then with soapy water or detergent. Use Spray Gun Solvent T 350 to clean spray guns.
Insulating acrylic solvent primer, isolates and covers smoke, mold, fumes and other stains, preventing them to reappear. Ideal for insulating surfaces covered with distempers.
White mat, solvent-based, multi-purpose primer based on thermoplastic acrylic resins. Owing to its unique formula, it isolates and covers surfaces stained with smoke, smog, grease, moisture, mildew, etc., without allowing them to reappear. Due to its long-lasting whiteness, its exceptional resistance to water vapour and mildew is ideal for insulating surfaces covered with water paints or distempers (lime wash or ceiling white). It is also used as an undercoat for Vitex’s water-based paints and as a final paint for ceilings. It provides great hiding power, premium quality, superior durability, as well as excellent spreading rate and adhesion to masonry surfaces, plaster, wood, etc.
• Acrylic insulating primer
• For surfaces stained with smoke, smog, grease, moisture, mildew etc
• Ideal for insulating surfaces covered with water paints or distempers
COLOURS
Available in white.
TECHNICAL SPECIFICATIONS
- Surface drying time 1-2 h
- Water dilution percentage 5%
- Spreading rate 7-9 m2/lL
- Application by brass
- Application by roller
- Application by Spray gun
INSTRUCTIONS
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
APPLICATION
Stir well before use. Apply one or two coats by roller or brush diluted up to 5% with Brush Solvent T 300 or airless spray gun diluted up to 5% with Spray Gun Solvent T 350. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%.
It is touch dry after 1-2 hours and can be recoated after 24 hours or after 4-6 hours for coated with Vitex’s emulsion or acrylic paints. Drying time depends on weather conditions (humidity and temperature).
Clean rollers, brushes, floor stains, etc. with Brush Solvent T 300 and then with soapy water or detergent. Use Spray Gun Solvent T 350 to clean spray guns.